In 2015 we have supplied our first 3D printed light weight mounting bridges. By continuing the development of our...
Tech Bridge® Soft
Flexible and expandable 1mm. Inner sleeve.
Contains Dyneema® that is offering maximum strength combined with minimum weight. It is up to 40% stronger than aramid fibers such as Kevlar®.
Dyneema® fiber is extremely durable and resistant to moisture, UV light and chemicals.
Compressible 1 mm. pre-compressed Foam Layer.
The compressible pre-compressed Foam Layer has high rebound resilience and is up to 50% compressible without bulging.
Resistant to permanent deformation, good abrasion resistance, resistance to aging, weathering and cleaning solvents used for polymer plate cleaning.
Stitch, Bonded and Compressed Core Material in various thicknesses.
Contains a filament fiber base which is volumized by thermoplastic micro balloons. Light weight with extreme high flexural strength and form stability.
This 2 mm. Layer contains Epoxy Vinyl-ester-resin reinforced with technical filaments and polyester fleece.
Outer Comprissible Surface Layer
The Outer Surface Layer contains Epoxy Vinyl-ester-resin reinforced with technical filaments and polyester fleece.
High chemical and temperature resistance.
The compressible surface layer (40, 50 or 60 ShA) consists of cellular, water crossed-linked foamed polyurethane.
Features & options
With this slot the mandrel and bridge are inseparable.
Protects the core from damage by ink and solvents.
Separate Air & Air Through
All Tech Bridges® are available as either Air-through or Separate-air.
|Bridge Sleeve||Tech® Pro||Tech® Pro+|
|Inner metal ring incl. Bayonet slot||•||•|
|Air Through or Separate Air||•||•|
In case of questions, Contact us.